Leo · 2026-11
A reseller who buys appliances, puts its own name on them and sells capacity it controls is doing wholesale cloud storage, not retail. The buying questions change with it. Minimum order, branding depth, firmware ownership, packaging and returns move to the front of the conversation, and the spec sheet comes later.

The question that decides most contracts is not about price. If the box carries the reseller’s logo, whose firmware update does the customer call about? Answer that in writing and the rest of the negotiation gets shorter.
Here is how the programme looks from the supply side, and what a dealer should verify before signing.
The reseller becomes the brand. Hardware comes from a manufacturer, the portal and the mobile app carry the reseller’s identity, and the customer relationship stays with the reseller. Capacity is sold as a device rather than a monthly line. That is what wholesale cloud storage purchasing actually changes: the channel, not the hardware.
That model fits dealers who already serve small offices, clinics or practices and want a storage line without building a hardware team. It fits integrators less well when they only resell with no support desk, because the first firmware question lands on them.
Two commercial facts follow. The reseller holds stock, so working capital matters. And the reseller owns the support experience, so the manufacturer’s documentation and spare-part policy matter more than the unit price.

A practical ladder has three rungs: a one-bay entry unit for branch offices, a two-bay unit for small practices, and a four-bay unit for sites that record video or edit media. The published line runs from a single-bay chassis to a four-bay unit, so a dealer can build the same ladder without mixing suppliers.
Dealers who try to launch with five SKUs at once usually end up with four slow movers and a stock problem. Launch with two, prove the support loop, then add the four-bay unit when the first customer asks for a backup target.
Keep the naming consistent across the ladder. A customer who upgrades should recognise the portal, the app and the accessory kit without reading a manual.
Two practical notes for the SKU sheet. Adapter variants and documentation languages belong in the SKU definition, because a unit boxed for a German practice is not the same SKU as one boxed for a Spanish clinic. And accessories, meaning the drive caddy kit and the rail set, should be priced separately so the ladder stays comparable across markets.

Deeper than most dealers expect, and shallower than some assume. Logo by silkscreen or laser engraving, a branded portal and boot animation, localised packaging and documentation, and a white-label mobile app published under the reseller’s developer account all sit inside the first tier.
A new front panel mould, a different board layout or a new drive cage moves the project to a second tier with a higher minimum. The table below shows the ladder we publish, with the order quantities attached to each rung.
| Level | What changes | Minimum order | Typical buyer |
|---|---|---|---|
| L1 | Logo, packaging, documentation language | 100 units per SKU | Dealer testing a new line |
| L2 | Firmware UI, boot animation, app branding | 100 units per SKU | Reseller with a support desk |
| L3 | Enclosure or front panel change | 1,000 units | Distributor with a private label |
| L4 | New board layout or new tooling | 1,000 units | Brand with a multi-year plan |
Read the minimum against your sell-through, not against your ambition. A hundred units is the published minimum, and it fits a dealer with a modest account base. For a dealer with three accounts it is a warehouse problem, not a starting order.
The four-bay unit in that ladder is the X4, and its published specifications sit on the X4 product page. A dealer who wants a two-bay starting point can compare it with the entry model before setting the price list.
Ask this before the logo discussion. A branded portal on top of an unbranded firmware is one arrangement. A separate firmware branch maintained for the reseller is another, and only the second gives the reseller control over update timing.
Our OEM scope covers a branded interface, custom event rules, default retention settings and a branded update channel. What it does not do is hand over the source tree. Dealers who need that should negotiate it as a separate agreement rather than assume it.
Every firmware branch carries a maintenance cost for somebody. A dealer who takes a branch without a plan to test updates will ship a regression to a clinic and learn the word rollback the hard way.

Four sets. The declaration of conformity covering CE, with the RoHS, REACH and WEEE statements that accompany it. Product identifiers, meaning EAN or UPC codes for each SKU. Packaging artwork proofs, signed off before the run. And a spare-part list with the part numbers your support desk will quote. If the same SKU is also headed for North American shelves, ask for the FCC test report in the same folder.
WEEE deserves a specific question, because producer responsibility for electronic equipment sits with whoever places the unit on the market. A reseller that brands the device is usually the producer for that purpose, and the registration is national.
Our documentation support covers the marks our product lines carry, and the certifications page lists them. The list stops at CE, UKCA, FCC, RoHS, REACH and WEEE, so anything beyond it has to be requested in writing rather than assumed. Ask your own compliance adviser which national registers apply to your entity before the first pallet ships.
Three lines destroy a wholesale plan, and none of them is the unit price. Freight and duty on a pallet of appliances. Spares held for the warranty period. And the support hours a dealer did not budget for.
Run the arithmetic on your own numbers. Landed cost per unit equals the unit price plus freight and duty divided by the units on the pallet, plus a spare provision. Take 100 units of the $400 four-bay platform: the appliance spend is $40,000, and two spare units add $800, which is exactly two percent of that spend. That is the cheapest line in the model, and the one most often left out.
Our standard 3-year warranty is a published term, not a marketing line. The spare ratio is different: two units per hundred ordered is a planning rule a dealer sets for itself, not a factory commitment. Scale it to the install base you expect to hold, and revisit it after the first support quarter.
The trade-off is worth stating in the dealer agreement. A lower minimum order keeps capital free and raises the unit cost; the published floor is 100 units per SKU for silk-screen or firmware-UI branding, and 1,000 units once the enclosure or the board itself changes. A deeper branding level lowers the unit cost and locks stock. Dealers who pick both ends of that trade usually run out of working capital before the line matures.
Order a sample at the published unit price and install it in one friendly account, so the pilot mirrors a real wholesale cloud storage order. Record the setup time, the first support call and the customer’s reaction to the portal. Then decide whether the line belongs in the catalogue.
Sample fees are credited against the first volume order, which makes a pilot cheap if the project proceeds and honest if it does not. Ask for that in writing, with the crediting rule stated.
Run the pilot in the market you intend to sell into. A unit configured for a German practice and a unit configured for a Spanish clinic differ in documentation language and adapter variant, and the pilot is where those gaps show up.
Set a decision date before the pilot starts, and hold it. A pilot without a date quietly becomes the whole programme, and the stock sits in the warehouse while everyone waits for feedback that never gets collected.
woCyber manufactures NAS and edge appliances for brands and distributors, with development in Beijing and mass production in Shenzhen, and more than 500,000 units shipped across 30+ export markets. Volume is booked at order confirmation rather than promised in advance.
The OEM/ODM page lists the branding options, the interface languages and the packaging choices, including FSC-certified board on request. Regional exclusivity is negotiated against an annual volume commitment and written into the distribution agreement.
Dealers who want to see the production sequence before committing should read the factory page and, if useful, ask for a video audit or a scheduled engineering visit. Product specifications sit on the products page.
Do we have to buy a full container to start? No. The first branding tier starts at 100 units per SKU. A container becomes relevant when freight per unit starts to dominate the landed cost, which is a decision for your own volume plan.
Can we sell under our own brand in two countries? Yes, subject to the territory terms in the distribution agreement. Exclusivity is granted against a volume commitment, and none is granted by default.
The warranty split matters more than most dealers expect. The reseller owns the customer relationship end to end, and we support the replacement path under the standard three-year warranty; who pays freight on a return is part of that same conversation, and it belongs in the agreement rather than in a support ticket.
Is the mobile app published under our account? Yes, the white-label app is published under the reseller’s developer account, which keeps the listing and the reviews with your brand.
Growth rarely means switching platforms. Move customers up the ladder instead: a branch office on one bay steps to two bays without changing the portal, and the support training you paid for stays valid.
Sources. Directive 2012/19/EU on waste electrical and electronic equipment, read on EUR-Lex on 17 November 2026, eur-lex.europa.eu. ENISA product security pages, read the same day, enisa.europa.eu. woCyber OEM and product pages, read 17 November 2026.
Order quantities, warranty term and platform counts come from published pages. Nothing in the margin section is a quoted saving, because freight, duty and local support costs are set by your own contracts.
We are the factory: SMT to shipment under one roof, R&D in Beijing, mass production in Shenzhen. Factory-direct pricing without trading-company markups.
Browse all platforms →Branding starts last on a multi camera AI NVR OEM platform, not first. The order that holds up: camera count in writing,…
November 19, 2026NAS sourcing for US importers lives or dies on documentation: the certification file, the shipping paperwork, and the commercial terms confirmed in…
November 19, 2026A self-hosted cloud appliance keeps your files on hardware you own and still serves them to every device you use. This verification…
Ask our export team for the OEM/ODM cooperation guide and a written quotation.