Leo · 2026-11
A NAS MOQ and volume tier guide exists because the first question a brand owner asks is not the price, it is how few units they can order before the factory will touch the project. On woCyber platforms the published threshold is 100 units per SKU for a reconfiguration, and 1,000 units where a new PCB respin or new tooling is required.

That two-tier split is the whole commercial structure in one line. Everything else in a quotation, from NRE to tooling ownership, hangs off which tier the project falls into. woCyber is the export brand of a Beijing-based storage hardware manufacturer with 15+ years in storage OEM and ODM work, so the numbers below come from a supplier that runs this conversation weekly.
The two tiers are 100 units per SKU for configuration changes on an existing platform, and 1,000 units where the project needs a new PCB respin or new tooling. The split follows engineering cost, not order value.
| Tier | Threshold | What changes | What the buyer supplies |
|---|---|---|---|
| Reconfiguration | From 100 units per SKU | Logo, enclosure finish, packaging, firmware UI strings, bundle contents, regional power adapter | Artwork files, UI strings, packaging copy, target market |
| New PCB respin or tooling | From 1,000 units | Board layout changes, port mix, enclosure mould, new bay count, new thermal design | Electrical requirements, mechanical drawing, test plan, compliance target |
Most first projects land in the top row. A brand that wants its own logo on an existing four-bay chassis, its own boot animation, its own app listing and its own retail box is buying a reconfiguration. A brand that wants a different port layout or a smaller enclosure is buying engineering, and the 1,000-unit floor reflects the tooling and validation work involved.

A respin or a mould carries fixed cost that must be recovered across units. Below 1,000 units, the per-unit share of that fixed cost turns the project into a one-off build rather than a product line.
Consider a hypothetical quote where tooling and validation work is quoted at a fixed amount and the buyer wants a 300-unit first run. Divided across 300 units, the fixed share lands at 1,000 ÷ 300, which is 3.33 times the share it would be across 1,000 units. The buyer can still order 300, but they should expect a project quote rather than a catalogue quote, and they should expect the supplier to say so plainly.
Buyers who want a small first run and a custom enclosure usually split the plan: order 100 units of a reconfigured existing platform to test the market, then commit to 1,000 units for the moulded version once sell-through is proven. That sequence costs more in total and far less in risk.
Samples are charged at the published unit price, and the sample fee is credited against the first mass-production order. NRE is quoted per project and can be credited against volume. Tooling is either amortised into the unit price or invoiced separately, and ownership transfers to the buyer once it is paid in full.
Those three mechanisms matter more than the MOQ number for cash planning. A brand paying for samples, NRE and tooling in one quarter is funding the project before the first sellable unit ships. A brand that credits samples and NRE against volume recovers part of that outlay, but only after the mass order lands.
Payment terms sit outside these numbers on purpose. The published position is that terms are confirmed in writing at order confirmation, and buyers should treat any verbal split as unconfirmed until it appears in the PO paperwork.
A brand owner should bring five items to the first call: target market, unit volume for the first twelve months, the features that must change, the retail box contents, and the compliance markings the channel requires.
Volume estimates decide the tier. A brand that says “we will see how it goes” should expect the project to be priced as a one-off, because the supplier cannot plan tooling against an unknown volume. A brand that names a first order and a follow-on order gets a clearer commercial structure and a realistic NRE position.
The channel requirement catches buyers out. Retail listings in the United States usually need a UPC, and European listings need WEEE producer markings plus the local importer details. The published OEM support set includes EAN and UPC codes, energy and compliance labels, WEEE and producer responsibility markings, and country-of-origin marking, so those items should be listed in the brief rather than discovered at packaging approval. The US Commercial Service export guidance covers the documentation side of an import programme, and the ICC Incoterms rules define who pays for freight, insurance and duty at each stage.

Warranty is uniform across tiers: the published term is a standard 3-year warranty, and project-life spare parts supply can be written into the agreement. Volume does not change the term, but it does change how spares are stocked.
Buyers running a 100-unit reconfiguration should ask for a spare-unit allowance in the first order, because a single dead unit in a 100-unit fleet is a visible failure for a new brand. Buyers at 1,000 units should ask for a spares schedule and an RMA process in writing. The negotiation notes for that conversation sit in nas-warranty-rma-negotiate-volume.
Regional exclusivity is a separate agreement, negotiated against committed annual volume rather than granted by default. A brand that wants protection in a territory should expect to commit to a number, and should expect the supplier to hold other customers in that territory to the same configuration.
The reconfiguration tier covers the existing product line: the four-bay X4, the two-bay S2, and the compact A2 Pro and A3 Pro platforms. An OEM buyer can change branding, packaging, firmware UI and bundle contents on any of them from 100 units per SKU.
The published X4 specification lists 4 bays, an Intel N100 processor, 8 GB DDR4 memory expandable to 16 GB for OEM builds, 64 GB eMMC boot storage expandable to 128 GB, 2 × 2.5GbE with link aggregation and failover up to 5 Gbps, and OEM options for NVMe cache and 10GbE port mixing. The S2 lists 2 bays, an RK3568 processor with a 1 TOPS NPU, 1 × 2.5GbE and a 60 TB ceiling. Both are documented on products/x4-nas-server and products/s2-smart-nas, and the platform comparison table on the products hub is the fastest way to shortlist a chassis before the first call.
Buyers who are still deciding whether to build a brand at all should read storage-oem-partner-checklist-7-checks-before-you-sign before signing anything. The checklist covers the questions that are expensive to ask after tooling is cut.
Compare two suppliers by writing the same five-line brief to both, then reading what each one refuses to put in writing. The MOQ number will be similar. The differences hide in what surrounds it.
Send both the same request: platform and bay count, target volume for the first twelve months, the changes required, the retail box contents, and the target market’s marking requirements. Then compare four answers. Which tier does each supplier place the project in, and why. What is excluded from the quote. Which items carry a fixed charge and which are amortised. What happens to tooling and NRE if the project is cancelled before the mass order.
A supplier that answers all four in writing is telling you it has run this process before. A supplier that answers the first two and defers the rest is telling you the commercial terms will be renegotiated after you have paid for tooling. The second pattern is common and expensive.
Ask one further question that separates catalogue sellers from manufacturers: which parts of the process happen in their own facility. For woCyber the published position is research and development in Beijing and mass production in Shenzhen, with SMT, assembly, functional testing, a 72-hour burn-in room and 100% outgoing inspection across IQC to OQC. A brand owner who cannot get a straight answer to that question should not send a tooling payment.

What is the minimum order for a private label NAS? The published threshold is 100 units per SKU for a reconfiguration of an existing platform. Projects that need a new PCB respin or new tooling start at 1,000 units.
Can the MOQ be split across models? The threshold applies per SKU, not per order, so a brand can order 100 units of one model and 100 of another. Mixed configurations inside one SKU are quoted as a separate project, so ask for the threshold in writing before the order.
Is the sample fee refundable? The sample fee is credited against the first mass-production order rather than refunded. Buyers who never place a mass order pay the published unit price for the sample.
Who owns the tooling? Ownership transfers to the buyer once the tooling is paid in full, and customer-specific tooling is not reused for another buyer. Amortised tooling follows the same ownership rule.
Does volume change the warranty? No. The published term is a standard 3-year warranty at every tier, with spare parts supply available across the project lifecycle and the detailed terms confirmed in writing at quotation.
Whether you need surveillance storage, private cloud for business data or an OEM/ODM partner, our export team will map the right platform to your application — reply within one working day.
Browse all platforms →Branding starts last on a multi camera AI NVR OEM platform, not first. The order that holds up: camera count in writing,…
November 19, 2026NAS sourcing for US importers lives or dies on documentation: the certification file, the shipping paperwork, and the commercial terms confirmed in…
November 19, 2026A self-hosted cloud appliance keeps your files on hardware you own and still serves them to every device you use. This verification…
Ask our export team for the OEM/ODM cooperation guide and a written quotation.